Description
From the WS product family of professional intelligent measurement transducers with digital interface for environmental applications.
Supplementary description
WS504-UMB Smart Weather Sensor for measuring of air temperature, relative humidity, solar radiation, air pressure, wind direction and wind speed. Relative humidity is measured by means of a capacitive sensor element; a precision NTC measuring element is used to measure air temperature. Ultrasonic sensor technology is used to take wind measurements. Measurement output can be accessed by the following protocolls: UMB-Binary, UMB-ASCII, SDI-12, MODBUS. One external temperature or rain sensor is connectable.
Special features
- All in One
- Aspirated temperature/humidity measurement
- Open communication protocol:
- UMB-ASCII
- UMB-Binary
- SDI-12
- MODBUS
- Analoge outputs in combination with 8160.UDAC
- Third-Party-Rain gauge sensors are compatible: 0.1mm, 0.2mm, 0.5mm, 1mm heated and unheated.
Temperature | |
Principle | NTC |
Measuring Range | -50…60°C |
Accuracy | ±0,2°C (-20°C… 50°C), otherwise ±0.5°C (>-30°C) |
Relative Humidity | |
Principle | Capacitive |
Measuring Range | 0…100% RH |
Accuracy | ±2% RH |
Radiation | |
Response time (95%) | < 1s |
Spectral range | 300 to 1100nm |
Measuring range | 1400W/m² |
Air Pressure | & |
Principle | MEMS Capacitive |
Measuring Range | 300…1200 hPa |
Accuracy | /-0.5 hPa (0… 40°C) |
Wind Direction | |
Principle | Ultrasonic |
Measuring Range | 0…359.9° |
Accuracy | <3° RMSE >1.0m/s |
Wind Speed | |
Principle | Ultrasonic |
Measuring Range | 0…75m/s |
Accuracy | ±0.3m/s or ±3% (0…35m/s) RMS of reading, whichever is greater ±5% (>35m/s) RMS |
General Information | |
Heating | 20VA at 24VDC |
Protection type housing | IP66 |
Interface | RS485, 2-wire, half-duplex |
Operating Power Consumption | 24VDC /- 10% |
Operating Humidity Range | 0…100% |
Operating Temperature Range | -50…60%°C |
Under kan du finne nyttige dokumenter for produktet:
Dokumentasjon