Skip to content

Lufft – WS500 – Værstasjon WS500

Modell: WS500
Produsent: Lufft

Varenummer: 4611 Kategorier: ,
Lufft - WS500 - Værstasjon WS500 2

Bjørn Cato Solli

Luft og miljø
22 09 40 54

Description

From the WS product family of professional intelligent measurement transducers with digital interface for environmental applications.

Supplementary description

WS500-UMB Smart Weather Sensor for measuring of air temperature, relative humidity, air pressure, wind direction and wind speed. Relative humidity is measured by means of a capacitive sensor element; a precision NTC measuring element is used to measure air temperature. Ultrasonic sensor technology is used to take wind measurements. Measurement output can be accessed by the following protocolls: UMB-Binary, UMB-ASCII, SDI-12, MODBUS One external temperature or rain sensor is connectable.

Special features

  • Aspirated temperature/humidity measurement
  • Open communication protocol:
  • UMB-ASCII
  • UMB-Binary
  • SDI-12
  • MODBUS
  • Analoge outputs in combination with 8160.UDAC
  • Third-Party-Rain gauge sensors are compatible: 0.1mm, 0.2mm, 0.5mm, 1mm heated and unheated
Selger Bjørn Cato Solli
Temperature
Principle NTC
Measuring Range -50…60°C
Accuracy ±0,2°C (-20°C… 50°C), otherwise ±0.5°C (>-30°C)
Relative Humidity
Principle Capacitive
Measuring Range 0…100% RH
Accuracy ±2% RH
Air Pressure
Principle MEMS Capacitive
Measuring Range 300…1200 hPa
Accuracy /-0.5 hPa (0… 40°C)
Wind Direction
Principle Ultrasonic
Measuring Range 0…359.9°
Accuracy <3° RMSE >1.0m/s
Wind Speed
Principle Ultrasonic
Measuring Range 0…60m/s
Accuracy ±0.3m/s or ±3% (0…35m/s) RMS of reading, whichever is greater ±5% (>35m/s) RMS
Heating 10VA at 24VDC
General Information
Interface RS485, 2-wire, half-duplex
Operating Power Consumption 24VDC /- 10% <4VA (without heating)
Operating Humidity Range 0…100%
Operating Temperature Range -30…70%°C

Fyll ut skjemaet under for å få tilgang til utvidet dokumentasjon.