Gill Instruments – IS WindObserver – Vindmåler, NMEA ultralyd i rustfritt stål, EX ATEX IECEx IP66

Modell: IS WindObserver
Produsent:

 

Bjørn Cato Solli 3

Bjørn Cato Solli

Luft og miljø
911 95 598

Sensoren består av vindsensor og en PCI. Sensoren monteres i Ex området, mens PCI monteres i sikkert område. PCI inneholder powersupply for sensor, galvaniske skiller og RS-422 NMEA interface.

1360 I.S WindObserver anemometer

  • IECEx SIR 13.0157
  • SIRA 00ATEX2218
  • II 1 GD
  • Ex ia IIC T4 Ga
  • Ex iaD IIIC T135C Da IP66
  • (Ta = -30C to 70C)

1360 I.S WindObserver PCI

  • IECEx SIR 13.0156
  • SIRA 00ATEX2217
  • II (1) GD
  • [Ex ia Ga] IIC
  • (Ex iaD Da) IIIC
  • (Ta = -30C to 40C)

Features

  • 2 Axis Precision Ultrasonic Anemometer
  • 0-75m/s (0-168mph) Wind Speed
  • 0-359° Wind Direction
  • ATEX and IECEx Approved for use in Hazardous Area
  • Robust Stainless Steel Construction
  • No on shore maintenance required
  • Free Windview Software

 

ex iecex logo

 

 

Wind Speed Specifications

Range: 0-75m/s (0-168mph)
Starting Threshold: 0.01m/s
Accuracy: ±2% @ 12m/s
Resolution: 0.01m/s

 

Wind Direction Specifications

Range: 0-359° (no dead band)
Accuracy: ±2° @ 12m/s
Resolution:

Measurement

Ultrasonic Output Rate: 1Hz
Parameters: Wind Speed & Direction
Units: m/s, knots, mph, kph, ft/min
Averaging: 3, 5, 10 or 15 seconds

 

Digital Output

Communication: RS422/RS232 for power supply and interface RS422 from anemometer
Baud Rates: 1200, 2400, 4800, 9600, 19200, 38400.
Formats: 8 bit data; odd, even or no parity
Anemometer Statue: Supplied as part of standard message

 

Power Requirement

PCI:

 

1) 100-120 VAC, 10VA
2) 200-250 VAC, 10VA

Mechanical

External Construction: 316 Stainless Steel
Size: 380 x 210mm
Weight: 1.6Kg

 

 

Under kan du finne nyttige dokumenter for produktet: